Electrical & Audio Guides
Glove Box Light (By: Andrew Attenborough)
Some Fiesta's (like mine) have the glove box but no lamp inside, fitting is incredibly easy. Just unscrew the locking mechanism from the top of the glove box in a scrap car (cutting the wires to make them as long as possible), replace your lock with this and connect the wires to one of the bulbs behind the heater control panel. You will need to take the front off the panel and thread the wires from the lamp through, best done by reaching up from underneath the dash having pulled the carpet down.
(The glove box light is only about £5 from Ford so if you can't find one in the scrappy it's easy to get hold of, you just need to solder some long wires onto it or you can use the mini speaker terminal type crimp connectors. - Ollie)
